DeviceNet Products

DN-100 Series
DeviceNet 1-in, 1-out 24V Discrete I/O

The DeviceNet DN-100 series provides a single digital input and a single digital output in a sealed tubular package (166mm x 22.4 mm dia.)  This device provides an ideal network attachment solution for a variety of non-networked sensor/actuator combinations.

DN-1600
DeviceNet 16-in, 16-out 24V Discrete I/O

The DN-1600 is a compact I/O module that provides direct connection of sensors, limit switches, and other discrete input devices. The DN-1600 also provides output drivers for relays, solenoids, lamps and other discrete output devices.  Connections are made through standard plug-in screw terminals.  The module is housed in a DIN rail mounting shell.

DN-400 Series
DeviceNet 4-in, 4-out 24V Discrete I/O

The DN-400 provides a DeviceNet interface to control and monitor 4 general I/O points and includes two extra inputs to monitor on-board and external 24 VDC auxiliary power. Available in two sizes, the standard sized DN-TC400 (60mm x 68mm) or the reduced sized DN-TC400-0.5 (38.1mm x 63.5mm),  two connector options (shrouded or open headers), and multiple power configurations the DN-400 fits neatly into any DeviceNet I/O application.

DN-410 Series
DeviceNet Serial ASCII I/O

Huron Net Works’ DN-410 series products provide a low cost solution for connecting to serial data over DeviceNet. The DN-410 uses Huron Net Works’ DeviceNet Serial Link Interface Protocol (DN-SLIP) to allow point-to-point communication between serial I/O and DeviceNet. Conveniently configurable using any EDS capable configuration tool and available in two form factors, the DN-410 series fits neatly into any application.

DN-500
DeviceNet 5-in, 5-out Discrete I/O for use in Lighted Push Button Pendant applications

The DN-500 module provides a DeviceNet connection to five 5VDC general purpose inputs and five bus voltage 40mA outputs with overload protected and faults signals. The DN-500 offers five pluggable Square-D sockets (PN: ZB6Y010) ideal for any lighted push button panel or pendant application. Also provided are five screw terminal connectors in parallel with the sockets to allow for alternative configurations or the addition of alternative push button vendors' products.

DN-A101
DeviceNet Analog current loop in, 120 VAC out

The DeviceNet DN-A101 combines a 4-20ma input and an AC output in a rugged aluminum enclosure. The input, with 8-bit resolution, can be used to sense any analog value (e.g. current, voltage, temperature, pressure, or flow) from any 4-20ma transmitter.

DN-A102
DeviceNet Pneumatic Valve (dense pack) Interface Module

The DN-A102 is a DeviceNet interface module for a pneumatic valve manifold with support for a proportional valve. The inputs and some of the outputs can be used to control water saver valves.

DN-Custom
DeviceNet Made to Order I/O

Huron Net Works specializes in custom DeviceNet I/O. We can bring DeviceNet capability, optimized for your specific requirements, to your products. We have provided instant network-capable product lines for major industrial control suppliers providing systems for material handling, material pull, automatic paint spray, robotic welding, motor control, and quality assurance.  We will support your engineering and production teams from concept through production.

DN-EMU
DeviceNet Master Emulator II

The DN-EMU Emulator software application, a general-purpose tool for developing and debugging DeviceNet nodes, comes pre-installed in DeviceGate. The Emulator monitors DeviceNet bus traffic, accommodates time stamps, and generates messages for configuring or testing nodes on the bus. The DN-EMU is ideal for developers of DeviceNet products interested in testing their devices.

DN-HV500 New!
DeviceNet Interface for Vishay High Tension System

The DN-HV500 is a compact low cost DeviceNet network interface to the Vishay High Tension System controller.  This module replaces expensive modular or rack I/O subsystems with a solution optimized for the Vishay system.

DN-IDS16
DeviceNet 16-in Sealed Block

The DN-IDS16 is a low cost input module which allows direct connection of sensors, limit switches, or other discrete input devices to DeviceNet. This compact design provides 16 inputs via 8 standard micro-style (12mm) connectors. The sealed housing provides robust protection from harsh environments.

DN-PC2
DeviceNet PC Interface Card

The DN-PC2 has been discontinued and replaced by the DeviceGate.  Documentation can still be found at the link above and support is still offered.

DN-TC400 Series
DeviceNet Robot Tool Changer Modules

Huron Net Works’ DN-TC400 series products provide a low cost solution for connecting robot tool changer applications to DeviceNet. Separate robot I/O and tool ID boards allow for up to 256 different tools per robot. Each board is available in two sizes and are completely interchangeable.

DN-TC468
DeviceNet 68-in, 4-out 24V Discrete I/O

The DeviceNet DN-TC468 offers an unprecedented 68 general Inputs and includes 4 Outputs all in a compact 152.4 x 88.9mm board. This module provides the ability to control and monitor I/O points and offers on-board and external 24 VDC auxiliary power sensing.

Accessories
Connectors, Taps, Labels, and more

Huron Net Works’ offers a variety of low cost custom physical media components ranging from a DeviceNet open-style connector tap to custom mini connector assemblies and labeling.

CDMEM NEW!
DeviceNet Master Emulator

CDMEM is a low cost DeviceNet development software tool that is designed to run on our newest development platform,  the DeviceGate.  This software is loaded onto the DeviceGate and is easy to reach from any type of computer that can utilize telnet connections.

DeviceGate NEW!
Ethernet-to-DeviceNet Interface

The DeviceGate DN-E100 is a low-cost Ethernet-to-DeviceNet interface containing an integrated TCP/IP stack with a web server. A DeviceNet emulator application (including all of the capabilities of our already popular DN-MEM) is included standard with the DN-E100 and can be conveniently controlled using any standard web browser.